Alpine IVE-W530BT Car Stereo System User Manual


 
17-EN
RDS SETUP mode
3
Touch [PTY] after selecting the programme type to
start searching for a station of the selected
programme type.
FM Radio mode
3
Touch [PTY SEARCH] after selecting the
programme type to start searching for a station of
the selected programme type.
If no station is found, “NO PTY” will be displayed.
* The button displays the current tuning mode.
Receiving Traffic Information While
Playing CD or Radio
The example explained here is how to receive the traffic information
broadcast during CD playback.
1
In the CD mode, press and hold Rotary encoder
(TA) for at least 2 seconds to turn on the Traffic
information mode.
The unit automatically starts to search the receivable traffic
broadcasts.
When the traffic information broadcast is searched out, the
CD mode is switched to the Radio mode and the unit
receives the traffic information broadcast.
When the traffic information broadcast starts, the unit
automatically mutes the CD.
When the traffic information broadcast finishes, the unit
automatically returns to the original source you were
playing before the traffic information broadcast began.
The receiver is equipped with the EON (Enhanced Other Networks)
function so if the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station
that broadcasts the traffic information.
2
When the traffic information broadcast has finished,
the unit returns to the CD mode.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Touch [NEWS] to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display. Touch
[NEWS] again to deactivate the Priority News mode and
return to the programme you were previously listening.
2
Touch [ ] to return to the previous screen.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Tune in a radio station that transmits text messages.
2
Touch [INFO.] in the FM radio mode to activate the
Radio Text mode.
The display shows “WAIT” for a few seconds.
3
To change the Radio Text display, touch [INFO.].
If there is no receivable text message or the unit cannot receive a text
message properly, the display shows “NO TEXT”.