Filter
Top Products
33-EN
Source Setup Operation
1
Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of Source Setup.
The Source Setup screen appears.
3
Touch the title bar of your desired Setup mode.
DVD Setup
*
1
/ Radio Setup / BLUETOOTH Setup
*
2
/ RDS
Setup
*
3
*
1
Refer to “DVD Setup” on page 31.
*
2
Displayed when “BLUETOOTH IN” is set to other than “OFF”
(
page 41).
*
3
Refer to “RDS Operation” on page 16.
4
Touch [ ], [ ] or the title bar, etc. of the desired
item to change its setting.
Radio Setup:
RDS Clock DISP / FM Level / PI Seek / RDS Regional /
PTY Language / PTY31
BLUETOOTH Setup:
Paired Devices / Device Search / Clear Device / Service Provider /
Visible Mode / Auto Answer / Speaker Select / MIC Input /
Firmware Version / Firmware Update / BT Menu Language /
Shortcut Memory
• For BLUETOOTH Setup details, refer to “BLUETOOTH Setup”
(page 43).
5
Touch [ ] to return to the previous screen.
“Radio Setup” is selected on the source setup main menu in step 3.
RDS Time Display
When ON is selected, the clock is adjusted automatically based
on the time data sent from the RDS broadcast.
Setting item: RDS Clock DISP
Setting contents: OFF / ON
Adjusting Source Signal Levels
If the difference in volume level between the CD and FM radio is
too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting contents: Low / High
PI Seek Setting
Setting item: PI Seek
Setting contents: OFF / Auto
Receiving RDS Regional (Local) Stations
When OFF is selected, the unit automatically keeps receiving the
related local RDS station.
Setting item: RDS Regional
Setting contents: OFF / ON
Switching the Display Language of PTY (Programme Type)
You can select one of the patterns of the display languages.
Setting item: PTY Language
Setting contents: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast) Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to ON.
• The unit will show “Alarm” in the display during PTY31 reception.
Source Setup
The Parking Brake must be engaged to access the Source
mode screen. Attempting to access this screen while driving
will display the warning-Can’t operate while driving.
The following steps 1 to 5 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.
Radio Setup
OFF: To adjust it manually.
ON: Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
To adjust it manually, select OFF.