Alpine IVE-W530BT Car Stereo System User Manual


 
18-EN
Display example for MP3/WMA/AAC main screen
[ ] button: Refer to page 29
CD:
Displays the Track text*/Disc text*.
If there is neither Track nor Disc name information, “NO TEXT” will
be displayed.
MP3/WMA/AAC:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
Displays play state/track number/progress bar/elapsed
time/remain time.
MP3/WMA/AAC:
Displays play state/folder number/track number/progress
bar/elapsed playback time/remain time.
* Displayed when a CD text disc is inserted.
Playback
1
Press SOURCE/ .
The SOURCE selection screen is displayed.
2
Touch [Disc].
The display shows the Disc screen.
When a CD/MP3/WMA/AAC is inserted into the DISC SLOT
of the IVE-W530BT, with the label side facing up, the unit
starts to play the CD/MP3/WMA/AAC.
3
Touch [ ] or [ ] to select the desired track
(file).
Returning to the beginning of the current track (file):
Touch [ ].
Fast reverse:
Touch and hold [ ].
Advancing to the beginning of the next track (file):
Touch [ ].
Fast forward:
Touch and hold [ ].
To pause playback
Touch [ / ].
Touching [ / ] again will resume playback.
To eject the disc
Press .
If the disc does not eject, press and hold for at least 3 seconds.
The IVE-W530BT model include a built-in MP3/WMA/AAC unit. You
can play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA/
AAC files on this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA/AAC
files, refer to
pages 19 and 20 before using the unit.
Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
The unit can play discs containing both audio data and MP3/WMA/
AAC data.
The track display for CD audio data playback is the track numbers
recorded on the disc.
Three-inch (8cm) CD’s cannot be used.
If an MP3/WMA/AAC disc with many files and folders is played, it
takes a little longer than normal to start playback.
Touch [ ] to activate the search mode. For operations, refer to
“Search Function” on page 29.
Touch [10KEY] to activate direct search mode. For operations, refer
to
“Numeric Keypad Input Operation” on page 23.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
If the disc is left in the unit after pressing , the disc is
automatically pulled back into the unit and paused. In this case, start
playback by touching [
/ ] or eject again and remove the disc
within 15 seconds.
Repeat Play
Touch [ ] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [ ] again and select OFF to deactivate Repeat play.
1 Touch [P1/2]*
1
to change the function guide.
2 Touch [ ] and select the desired Repeat play.
*
1
Display may vary depending on the connected devices.
*
2
Only files in a folder are repeatedly played back.
CD/MP3/WMA/AAC
CD: (off)
(Repeat one)
MP3/WMA/AAC:
*
2
(off)
(Repeat one)
(Repeat folder)