Filter
Top Products
45-EN
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch [ ].
The call starts.
• Indicator (Signal Strength):
While calling, the indicator will display the current signal strength of
your mobile phone. While in a mode other than Calling, the unit
cannot read the signal strength of the mobile phone exactly. In this
case, the indicator displays the signal strength of the last call.
• When “Setting the Received Calls automatically (Auto Answer)”
(page 44) is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.
After calling, playback will resume.
Hanging up the Telephone
Touch [ ].
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Turn the Rotary encoder to adjust the volume.
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
Redial Function
You can redial the person you have previously called.
After finishing a call, touch [ ] on the screen within
5 seconds.
The telephone is redialed.
Call waiting function
If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
1
If a second call is received during the current call
(caller1), the number of second caller (caller2) is
displayed instead of the current caller’s information.
Touch [
], the call waiting mode is activated.
In this case, caller1 is on hold, while you take caller2.
Display example for the 2nd incoming call screen
Second call message
Hang up the first call and the second incoming call is
answered.
Hang up the second incoming call.
Display example for the 2nd incoming call screen
Feedback of the connected second call
2
By touching [ ] on the call waiting screen,
you can switch between the calling person and the
person on hold.
A
A
B
B