35-EN
By setting to ON, the function guide will be hidden if no operation is
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
Setting item: Function Guide Fade
Setting contents: OFF / ON
• In DVD play mode, the function guide will be hidden if there is no
operation for 5 seconds even if you set OFF.
You can choose from 4 different colours for the font background.
Setting item: Base Color
Setting contents: Blue / Red / Green / Amber
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting contents: / Reset
1 Touch the title bar of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the Display
Setup mode screen.
• If you have touched a location other than the mark, touch [Reset]
to restore the adjustment screen to the initial setting.
• If you touch [ ] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.
Setting item: Visual Key
Setting contents: Navi / V.Sel
Visual EQ Setting Operation
1
After steps 1 and 2 in “Display Setup Operation”
(page 34) have been performed, touch the title bar of
Visual EQ.
The Visual EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
Visual EQ* Bright Color* Tint* Contrast
Sharp* User Memory*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [
] or [ ].
4
Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the Display Setup screen, and return to
previous main screen.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc. through the screen shown.
Turn the Function Guide ON/OFF
(Function Guide Fade)
Switching the Font Background Colour
Adjusting the Touch Panel
Setting the VISUAL Button
Navi: When Navi is set, [ ] will appear on the upper
right screen. Touch [ ] to switch to the navigation
screen directly. (Only when an Alpine optional RGB
Navigation is connected.)
V.S el : When V.Sel is set, [V.Sel] will appear on the upper right
screen. Recalls the VISUAL selection screen by
touching [V.Sel] on the main source screen.
Visual EQ™
The following steps 1 to 4 are common operations to each
“Setting item” of Visual EQ setting. Refer to each section for
details
