21-EN
Display example for DVD Video main screen
[ ] button: Changes to Navigation screen.
[ ] button: Displays the SETUP selection screen.
[ ] button: Changes to full screen.
Displays the disc (DVD VIDEO) being played back.
Displays tag information for DivX®.
• If [ ] on the DivX® mode screen is touched, the search list screen
is displayed. Refer to “Search Function” (page 29).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [P1/2], etc., may vary depending on
the connected device(s).
Disc types that can be used for each heading are
represented by the following marks.
Playing a Disc
IVE-W530BT has a built-in DVD player. When an optional Alpine
DVD/CD player is connected to the IVE-W530BT, you can control it
from the IVE-W530BT (except some operations).
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
DVD
A
A
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVD-
RW, DVD+R/DVD+RW recorded in a video
mode can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs and USB memory that are
recorded in the DivX® mode can be used.
WARNING
It is dangerous for the driver to watch the TV/DVD/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
Install the IVE-W530BT correctly so that the driver
cannot watch TV/DVD/Video unless the vehicle is
stopped and the emergency brake is applied.
If the IVE-W530BT is not installed correctly, the driver
will be able to watch the TV/DVD/Video while driving
the vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
To display the DVD mode screen
Caution
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
• If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition Key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.