Alpine IVE-W530BT Car Stereo System User Manual


 
49-EN
When an optional rearview camera is connected, rear view video can be
output to the monitor.
Be sure to set “Camera IN” to “ON” before using the Rearview
Camera, refer to
“Setting the Rear Camera Input” on page 39.
Switching the Rear Camera Screen
(Optional)
The rear view video will be displayed for the two situations as below.
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
This function is effective when the reverse wire is properly connected.
No sound output during Camera view display when ON is set in
“Camera mute setting” (page 40).
1
Press SOURCE/ .
The SOURCE selection screen is displayed.
2
Touch [Camera].
The Camera mode is activated and the rear view video is
displayed.
3
Touch [Guide ON] or [Guide OFF] to set whether
the rear camera guide line is displayed.
4
Touch [ ] to access to Visual selection screen, and
then touch [Normal] to return to previous main
screen.
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the
IVE-W530BT, the Navigation screen can be displayed on this unit.
1
Press SOURCE/ .
The SOURCE selection screen is displayed.
2
Touch [Nav.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
You can touch [V.Sel] to activate the Visual Sel. screen, and then
touch [Nav.]. The navigation mode is activated from the Visual Sel.
mode without interrupting normal audio. For details, refer to
“Switching the Visual Source Only (Simultaneous Function)” on
page 30.
You can also directly access to Navigation screen by pressing
[
] on main source screen. For details, refer to “Recalling the
Source” on page 13.
If the Navigation mode menu is not displayed on the main menu
screen, select ON in
“Setting the Navigation Mode” (page 40).
When the Navigation System is on and in guidance mode, the voice
prompts and navigation map interrupts the current audio source.
Rearview Camera
Operation (Optional)
Displaying the rear view video while the
car is in reverse
Displaying the rear view video manually
Navigation System
(Optional)