Filter
Top Products
34-EN
Display Setup Operation
1
Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of Display Setup.
The Display Setup screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
Visual EQ
*
1
/ Dimmer / Screen Dimmer Level
*
2
/ Function Guide
Fade / Base Color / Screen Alignment / Visual Key
*
1
For details, refer to “Visual EQ Setting Operation” on page 35.
*
2
Not displayed when “Dimmer” is set to “OFF”.
4
Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the Display Setup screen, and return to
previous main screen.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto / ON / OFF
• When ON or Auto is set, the setting is also applied for the button
lighting in
“Adjusting the Dimmer of Button Lighting at Night”
(page 38).
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: Screen Dimmer Level
Setting content: –15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Display Setup
The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.
Setting the Brightness of the Backlighting
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
ON: Keep the background illumination of the monitor dark.
OFF: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Adjusting the Minimum Level of Backlight