Filter
Top Products
37-EN
General Setup Operation
1
Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of General Setup.
The General Setup screen appears.
3
Touch [ ], [ ] or the title bar of setting item, etc., of
the desired item to change its setting.
Setting items:
Clock / Clock Mode*
1
/ Clock Adjust*
1
/ Summer Time*
1
/
Demonstration / Beep / Beep Level*
2
/ Auto Scroll / Language
Sel. / Dimmer Level*
3
/ Security Code
*
1
Displayed only when “Clock” is set to “ON”.
*
2
When Beep is ON, the item is displayed.
*
3
Not displayed when “OFF” is set in “Setting the Brightness of the
Backlighting” (page 34).
4
Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the General Setup screen, and return to
previous main screen.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting contents: OFF / ON
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting item: Clock Mode
Setting contents: 24h / 12h
Setting item: Clock Adjust
Further setting items: Hour / Minute / Time Adjust
Setting contents: 0-23 / 0-59 / Reset
• The clock-adjusting mode is cancelled when the power is turned off,
when [
] or [Exit] is touched.
• Clock adjustment can be made when “RDS Time Display” (page 33)
is set to OFF.
Setting item: Summer Time
Setting contents: OFF / ON
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: Demonstration
Setting contents: OFF / ON
• The demonstration operation is automatically repeated until the
function is turned off.
Setting item: Beep
Setting contents: OFF / ON
General Setup
The Parking Brake must be engaged to access the General mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
Displaying the Time
Setting the Clock Display
Setting the Time
Hour: Adjust the hour.
Minute: Adjust the minute.
Reset: If the clock shows less than 30 minutes past, the
minute will be “0”; more than 30, the hour advances.
Setting Summer Time
ON: Place the Summer Time mode ON. The time advances by
one hour.
OFF: Return to the ordinary time.
Demonstration Function
ON: Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
Sound (Beep) Guide Function
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button is pressed/
touched.