Filter
Top Products
60-EN
Indication for DVD
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “No Disc” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press for at least 3 seconds.
• Button operation on the unit or remote control (optional) is not
possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Mechanism error.
1) Press and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
Indication for USB Memory
• Database error or decoder error.
- You can solve the problem by switching the source.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the USB memory
or changing source.
• Abnormal current is run to the USB connector device.
- You can solve the problem by switching the source.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A USB Memory is not connected.
- Make sure the USB Memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB Memory.
- Connect the USB Memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.