Filter
Top Products
40-EN
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position.
Further Setting item: Guide Line Adjustment
1
Touch the title bar of Guide Line Adjustment.
The Guide Line Adjustment screen is displayed.
2
When you touch the guide pylon to be adjusted, a
border appears around the pylon.
3
Drag and drop the selected pylon or centre guide to
adjust its position.
4
After the adjustment is completed, touch [ ].
You can touch [Reset] during adjustment to return to the
default adjustment.
Camera mute setting
You can set whether to mute the source volume when the
camera video is displayed.
Further Setting item: Camera Mute
Setting Contents: OFF / ON
When you connect an optional navigation equipment, set it to ON.
Setting item: Nav. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVE-W530BT, the
voice guidance of the navigation system will be mixed with the radio or
CD play.
Setting item: Nav. Mix
Setting contents: OFF / ON
See “Adjusting Nav. Mix Level” under “Adjusting the Audio” on
page 29 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting its volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
• This setting is effective when Nav.IN of SYSTEM list screen is ON.
Setting item: AUX1 IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX-1 cannot be
changed from this unit.
After setting this item to ON, touch the title bar of AUX1 IN, the
following further setting items can be adjusted.
Adjusting the AUX1 name Mode
Further Setting items: Primary / Secondary
*
1
Setting contents: OFF
*
2
/ AUX
*
3
/ DVD / GAME / TV / DVB-T
*
3
/ NAV.
*
1
When TUE-T200DVB (sold separately) is connected, you can use it
to connect one more External Input device. Setting the Secondary
name can change the source name display of this device.
*
2
The setting is only available for Secondary.
*
3
The setting is only available for Primary.
• You can set Secondary name only when Primary name is set to
DVB-T. And you cannot set the same name as in Primary name.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected name is displayed on the Visual and Rear selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
Setting item: AUX2 IN
Setting contents: iPod Video / AUX
• When the current source is iPod video or AUX-2, this setting cannot
be adjusted.
Setting the Navigation Mode
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
Setting the AUX Mode
OFF: AUX-1 source is not displayed.
ON: AUX-1 source is displayed.
iPod Video: Set when an iPhone or a video compatible iPod is
connected to the iPod (V)/AUX Input Connector.
AUX: Set when an optional AV/RCA interface cable
(4-pole mini AV plug to 3-RCA) is connected. A DVD
player etc., with RCA audio/video output can be
connected to this unit. In this case, the iPod video
will not be displayed.