Filter
Top Products
64
Basic operation
Adjusting sound quality
Woofer Output can be stereo or mono. Select the method that matches the output method for
the sub-woofer system that is connected to the unit.
Touch to select
STEREO or MONO.
● Touch after making changes.
The woofer output setting will be saved
and system will return to the previous
operation screen.
The frequencies for the front and rear speaker high-pass filter (HPF) and woofer low-pass filter
(LPF) can be set within a range of 63 to 200 Hz. (This is the same as the HPF and LPF cutoff
frequencies.)
Touch to select the cut-off
frequency.
● Each time the switch is touched, the
frequency will be changed in the
following order shown below.
Woofer output setting
Woofer OUT
BACK
Crossover adjustment (X-Over)
Freq
63Hz 80Hz 100Hz 125Hz 160Hz 200Hz