Fujitsu AVN2454 Car Video System User Manual


 
132
1. Situations when a correction is necessary
Helpful tips
Correcting the distance
1
Touch on the MENU
screen.
Setup
2
Touch for CALIBRATION.
Adjust
3
Touch .
Tire Change
Automatic correction is performed.
The touch switch turns green during
automatic correction.
Using GPS data, the correction will
automatically be completed after driving
a moment and the touch switch will turn
back to blue.
The device performs automatic distance correction (automatic correction) using
GPS and vehicle speed signals. This may be delayed in the event of a sharp
deviation that overwhelms the automatic correction function (changing a tire,
being towed by another vehicle, etc.)
In such a case, drive about 10km along a road indicated by favorable GPS
signal reception conditions.
If correction is impossible, have the device inspected at the store of purchase.
During automatic correction, the vehicle position may be misaligned.
Even if the automatic correction is complete, because the distance correction
has a learning function, there may be variations in the progression of the
vehicle position mark depending on the driving conditions.
ATTENTION