Filter
Top Products
75
Navigation
guidance
After having set a destination, more destinations can be added.
In the following situations, set an additional destination.
Adding a destination
1
Touch .
Route
2
Touch for Destination.
Add
•See P44 and 60, “How to retrieve
maps”
and “Performing operations on
a retrieved map”.
•When setting a transit point between the present location and set destination
•When changing the set destination into a transit point and setting a new destination
Using the same method as setting a destination, touch to add a destination. (See
P64,
“One-touch setting”, P65, “Set from a registered point”, or P65, “Set using a map
retrieval method”
)
Add to
3
Select the map retrieval method
and display the map on which a
destination is to be set.
•The destination can be set using a detailed map with a reduction scale smaller
than 1 mile.
•Geographical points on maps representing set destinations are automatically
registered (up to 100 points) and can be used to retrieve a map when setting a
destination. When exceeding 100 points, the oldest entry is deleted every time a
new one is entered. Unnecessary points can be deleted. (See P123,
“Deleting
entries from the destination archive”
)
•When adding a destination with a transit road (see P80 and 81) indicated, that
transit road indication may be cancelled depending on that geographical point.
•When 2 or more destinations are set, appears.
Reorder
ATTENTION
Go to the next page