Filter
Top Products
69
Navigation
guidance
Touch switches
The following operations are enabled using the touch switches appearing on the all-
route display screen.
•The search result route is a reference route to the vicinity of the destination. In no
way is it the shortest, fastest or least congested route.
•The required time is calculated from the average vehicle speed (see P87) and
may have a slight deviation depending on the driving conditions.
•In the following situations, 3 routes cannot be displayed.
•When 2 or more destinations are set
•When a transit road is indicated
•After route guidance has started
•An all-route diagram can be displayed even after route guidance has started.
(See P92)
ATTENTION
Different routes are displayed to enable a selection. (See P73)
The route change screen is shown to enable the modification of the search conditions.
Also, indicating an additional transit route to the destination is possible. (See P75, 77, 80)
Route guidance can be initiated. (See P83) After route guidance is started, the display
returns to the present location screen.
Required time/remaining distance
When 2 or more destinations are set, every time the required time/distance remaining is
touched, you can switch displays to the next destination. (See P93) If deviating from the
road after route guidance has started, the distance to the destination in a straight line is
indicated.
Guide
Route
3Routes
1
2
3
4