Filter
Top Products
11 12
Connecting Devices to the TV Connecting Devices to the TV
Connecting an antenna, cable or satellite box
Connecting an Audio Visual (AV) device with a composite cable
Connecting an AV device with a component (YP
B
P
R
)
This section provides the steps to connect various devices to the TV.
Connecting Devices to the TV
1. Connect one end of a coaxial cable (not included) to the [RF OUT] jack on the antenna, cable or satellite box. If
you are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect
it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
2. Connect the other end of the cable to the [ANT/CABLE] jack on the side of the back panel.
3. Select TV as the input source using the [INPUT] button.
1. Use the audio and video cables to connect the composite video/audio jacks of the external AV device to the
jacks of the TV. (Video = yellow, Audio Left = white, and Audio Right = red).
2. Plug the connected devices into the main power socket before switching on the TV.
3. Select AV as the input source using the [INPUT] button.
1. Use a component cable to connect the component output jacks of the external device to the YP
B
P
R
jacks for
the TV. Use an audio cable to connect the component audio jacks of the external device to the TV AUDIO (L/R)
jacks.
2. Plug the connected devices into the main socket before switching on the TV.
3. Select Component as the input source using the [INPUT] button.
Figure 6. Diagram that shows how to connect an Antenna to the TV
Figure 7. Diagram that shows how to connect an AV device with a composite cable
Figure 8. Diagram that shows how to connect an AV device with a component cable
One AV device can be connected to the TV using a component or composite cable.
NOTE
Connecting an AV device with an HDMI cable
This type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video
Recorder (PVR), DVD, Blu-Ray, AV receiver and digital devices. In addition, some devices (such as a PVR or DVD
player) require an HDMI signal to be set to Output in the settings of the device.
For instructions, please refer to the User Manual that came with your device.
1. Use an HDMI cable to connect the [HDMI] output jack of the AV device to the [HDMI] jack of the TV.
2. Plug the connected devices into the main socket before switching on the TV.
3. Select one of the HDMI sources as the input source using the [INPUT] button.
Figure 9. Diagram that shows how to connect an AV device with an HDMI cable
The HDMI connector provides video and audio signals. It is not necessary to connect an audio cable.
NOTE
or
ANT OUT
Cable
VHF/UHF Antenna
EXTERNAL DEVICESTV JACK
ANT/CABLE
(not included)
(not included)
DVD Player/Recorder
Video
Camera
EXTERNAL DEVICES
Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
White(L)
White(L)
Red(R)
Red(R)
TV JACK
R
L
P
R
P
B
Y
P
R
/C
R
P
R
P
B
/C
B
P
B
Y
Y
Y P
B
P
R
COMPONENT IN
VIDEO
AV IN
L R
(not included)
(not included)
Audio Cable
Component Cable
HDMI
HDMI
TV JACK
EXTERNAL DEVICES
DVD
Set-top Box