Filter
Top Products
11
On the Status Display
If you press the INPUT SELECT button (→ o on page 9) currently lit, the status of the input signal and setting of MUTING are displayed for about
3 seconds.
● Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION.” (→ page 24)
● When “STATUS DISPLAY” is set to “AUTO” or “ON,” the status below is also displayed in the following cases:
– When you change the input
– When the signal condition of the current input changes
– When you turn on the monitor
● When “STATUS DISPLAY” is set to “ON,” the signal format will remain displayed 3 seconds after the status is displayed.
1 Signal format
● For the contents displayed, see “Available signals” on page 33 and “On the signal format” below.
On the signal format
The following messages appear depending on the type of input signals and their conditions.
When a DVI-D signal protected with HDCP is input
“*” (at the end of the indication) ➔
When no video signal comes in
“NO SYNC” ➔
When a noncompliant video signal comes in
“Out of range” ➔
When a signal that does not meet the MIX operating conditions is input in MIX mode
“Unsupported” ➔
2 Signal format of DVI input
→ On page 25 “DVI INPUT SEL.”
Status indication of DUAL LINK/3G SDI signal information
● “DUAL LINK” appears when the MAIN MENU “SDI DUAL LINK” (→ page 19) is set to “ON” in SDI input, and the 3G SDI signal
information appears when the MAIN MENU “SDI DUAL LINK” is set to “OFF.” However in MIX mode, the 3G SDI signal
information appears even when the MAIN MENU “SDI DUAL LINK” is set to “ON.”
Status indication of 3G SDI signal information
Following signal information can be displayed when a 3G SDI signal comes in.
3G A-1: Level A mapping structure 1
3G A-2: Level A mapping structure 2
3G A-3: Level A mapping structure 3
3G A-4: Level A mapping structure 4
3G B-DS1: Level B data stream 1
3G B-DS2: Level B data stream 2
3G B-DUAL: Level B DUAL LINK
3G B-DS1/2: Level B Dual stream mapping (in MIX mode)
3D format conversion method
● The 3D format conversion method appears when the 3D mode is activated while the MIX mode is “OFF.”
(→ page 19 “SDI FORMAT”/“DVI FORMAT” in the MAIN MENU “3D SETTING.”)
● Displayed left-justified when not in 3G SDI input or DVI input.
3 Detailed information on 3G SDI/HD SDI DUAL LINK input
● Displays the sampling structure/color space/pixel resolution of the signal format.
● Displayed when the 3G SDI or HD SDI DUAL LINK signal is input.
4 Setting of “MUTING”
● Displayed only when muting is activated (→ 5 on page 9).
5 Setting of FRAME SYNC.
● Only displayed when “FRAME SYNC.” in the MAIN MENU “3D SETTING” is set to “ON.” (→ on page 19)