Filter
Top Products
17
● In Cursor mode, the lines of the following two groups are displayed:
Group A: L line/R line/H line (Normal: Green / Over the LIMIT: Red)
Group B: L line/R line/H line (Normal: Magenta / Over the LIMIT: Orange)
• You can change a group to display by pressing the SELECT button. Each time you press the SELECT button,
the group changes as shown on the right.
• The line color turns to a color to be used when the LIMIT is exceeded when it goes beyond “FAR LIMIT” or
“NEAR LIMIT” under the MAIN MENU “3D SETTING.”
● You can move the L, R, and H lines by turning the POSITION knob.
To move right/up: Turn the POSITION knob clockwise.
To move left/down: Turn the POSITION knob counterclockwise.
To select a line to move: Press the PUSH SEL. button. Each time you press the button, the selected line changes in the following order.
• When you select a line while both Group A and B are displayed, the selection is performed for Group A first, and then for Group B.
• When both L and R lines are selected, the lines cannot be moved separately.
• Pressing and holding the PUSH SEL. button for 3 seconds or longer resets the displayed lines to the default positions.
Grid mode
The grid lines appear, which measure the visual difference.
● The following two types of the grid mode display are available: Normal display and Center window display.
You can change the display by pressing the SELECT button.
Normal display Center window display
● The width of the grid line can be changed. Turning the POSITION knob enlarges/reduces the width based on the upper left of the screen as
the datum point.
To enlarge: Turn the POSITION knob clockwise.
To reduce: Turn the POSITION knob counterclockwise.
Reduce the width Enlarge the width
● The ratio of the difference between the grid lines to the horizontal pixels appears in the percentage display.
● Pressing and holding the PUSH SEL. button for 3 seconds or longer resets the grid width to 100 pixels (default).
● When “L. INTENSITY” under the MAIN MENU “3D SETTING” is set to “LOW”, the grid line is displayed translucent.
Pixels/Percentage between the grid lines
Center window
L line R line
H line L+R line