Filter
Top Products
32
Specifications
General
Model name DT-3D24G1
Type
MULTI FORMAT 3D LCD MONITOR
Screen size
Type 24 wide format
Aspect ratio
16:10
Compliant video signal format
→ “Available signals” on page 33
Format
3G SDI
DUAL LINK HD SDI
HD SDI
SD SDI
EMBEDDED AUDIO
:
:
:
:
:
SMPTE424M/SMPTE425M
SMPTE372M
BTA S-004C, SMPTE292M
ITU-R BT.656: 525/625
SMPTE259M: 525
SMPTE299M, SMPTE272M
Audio output
Internal speaker: 1.0 W + 1.0 W
Operation environment
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz, or DC 24 V (Voltage range: DC 23.3 V − DC 25.5 V)
Rated current
1.15 A (AC 120 V)
0.67 A (AC 220 – 240 V)
4.8 A (DC 24V)
External dimensions (excluding
protruding parts)
Width: 564 mm (22 1/4˝) 564 mm (22 1/4˝)
Height: 448.6 mm (17 3/4˝) 408 mm (16 1/8˝)
Depth: 243 mm (9 5/8˝) 99 mm (4˝)
(with the stand) (without the stand)
Mass
12.0 kg (26.4 lbs) (with the stand) 9.1 kg (20.0 lbs) (without the stand)
Accessories
AC power cord, Power cord holder × 1, Screw × 2 (for power cord holder),
Circular polarizing glasses × 2 (for 3D viewing, not under warranty)
LCD panel
Type
24˝ wide, active matrix TFT
Effective screen size
Width: 518.4 mm (20 1/2˝) Height: 324 mm (12 7/8˝) Diagonal: 611.3 mm (24 1/4˝)
Number of pixels displayed
1920 × 1200
Number of colors displayed
16.77 million
Contrast ratio (TYP.)
1000:1
Input/output terminals
Video
DVI-D (HDCP) DVI-D signal input (compatible with HDCP): DVI-D connector x 1 (compatible with DDC2B)
E. AUDIO 3G SDI/HD SDI/SD SDI (IN 1/L)
Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):
Auto detection, 2 line, BNC connector x 2
E. AUDIO 3G SDI/HD SDI/SD SDI (IN 2/R)
E. AUDIO 3G SDI/HD SDI/SD SDI
(ACTIVE OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
2 line reclocked out, BNC connector x 2
Audio
AUDIO (IN) Analog audio signal input: 1 line, RCA connector x 2,
500 mV (rms), high impedance
AUDIO (MONITOR OUT) Analog audio signal input: 1 line, RCA connector x 2,
500 mV (rms)
External control
REMOTE (MAKE/TRIGGER)
→ “Using the MAKE/TRIGGER system” on page 26
REMOTE (RS-485)
→ “Using the serial communication” on page 28
REMOTE (RS-232C)