Filter
Top Products
23
SET-UP MENU
FUNCTION SETTING
Configure the sub menu display, the lighting color of the tally lamp, the size of images, the brightness of the button lamps.
Item Content Setting value
sub menu POSI. Select the contents and displaying position of “sub menu.”
The setting values and features are as follows.
LOWER1 : Displays the current setting and adjustment bar at the lower part of the screen.
UPPER1 : Displays the current setting and adjustment bar at the upper part of the screen.
LOWER2 : Displays the current setting at the lower part of the screen.
UPPER2 : Displays the current setting at the upper part of the screen.
• The adjustment bar is not displayed for some items.
LOWER1
UPPER1
LOWER2
UPPER2
TALLY SELECT
Select the color of the tally lamp. GREEN, RED
SD4:3 LARGE
Selects the picture size when the input signal format is 4:3.
The setting values and features are as follows.
OFF
ON
OFF
ON
:
:
Matches the vertical picture size to the number of pixels.
Matches the horizontal picture size to the horizontal size of the screen.
DIMMER
Select the intensity of the button lamps. NORMAL, DARK
PICTURE SUB ADJ.
Configure the standard level of image adjustment.
Item Content Setting value
CONTRAST
*1
Adjust the standard level for the contrast adjusted with the CONTRAST knob on the front panel. – 20 – +20
BRIGHT
*1
Adjust the standard level for the brightness adjusted with the BRIGHT knob on the front panel. – 20 – +20
CHROMA
*1
Adjust the standard level for the chroma adjusted with the CHROMA knob on the front panel. – 20 – +20
sub menu
Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while viewing the actual picture.
reset
Restore the default settings for all the items in “PICTURE SUB ADJ.” (You cannot select items to reset.)
*1
Memorized for each input.
H POSITION ADJ.
Adjust the center position of SIDE BY SIDE images.
Item Content Setting value
3D H POSITION
Display the center line to adjust the horizontal image position.
• The setting will be valid when the 3D mode is “ON” and MIX mode is “OFF” or invalid.
– 032 – +031
sub menu
Display the sub menu which enables you to adjust the items in “H POSITION ADJ.” while viewing the actual picture.
reset
Restore the default settings for all the items in “H POSITION ADJ.”
WHITE BALANCE SET.
Selects the gamma correction value, color temperature and adjusts the drive level and cutoff point of each color (R/G/B).
Item Content Setting value
GAMMA
Select a gamma correction.
2.2 (equivalent to γ2.2), 2.35 (equivalent to γ2.35)
2.45 (equivalent to γ2.45), 2.6 (equivalent to γ2.6)
COLOR TEMP.
Select the color temperature.
• The color temperature is corrected when the 3D mode is “ON.”
9300K, 6500K, USER
R DRIVE
G DRIVE
B DRIVE
*1
Adjust the drive level of each color (red, green, and blue). MIN – 000 – MAX (in 256 grades)
R CUT OFF
G CUT OFF
B CUT OFF
*1
Adjust the cutoff point of each color (red, green, and blue). MIN – 000 – MAX (in 256 grades)
sub menu
Display the sub menu which enables you to adjust the items in “WHITE BALANCE SET.” while viewing the actual picture.
reset
Restore the default settings for the drive levels and cutoff points of the selected color temperature. (You cannot select
items to reset.)
*1
Memorized for each color temperature.