Filter
Top Products
27
<Functions controlled by the MAKE/TRIGGER system>
Display Functions to be controlled Opening Short-circuiting
TALLY SEL Selects the color of the tally lamp Green Red
SDI 1/L Changes the input to “SDI 1/L” Invalid Valid
SDI 2/R Changes the input to “SDI 2/R” Invalid Valid
DVI Changes the input to “DVI” Invalid Valid
3D Activates/Deactivates the 3D mode Off On
MIX Activates/Deactivates the MIX mode Off On
3D FORMAT 3D format 1/3D format 2 change
*3
FORMAT1 FORMAT2
3G-B.DS Selects the data stream of “3G SDI LEVEL B” DS1 DS2
DUAL LINK Turns on or off “SDI DUAL LINK” Off On
MARKER Displays the area and safety markers Off On
FRAME Indication of the area of the specified aspect ratio Off On
C.MARKER The center marker indication Off On
MARK.SEL Selects the items of “MARKER”
*4
Non-“R-” items “R-” items
ASPECT Changes the aspect ratio 4:3 16:9
1:1 Displays in 1:1 mode Off On
STATUS Status display
*5
→ “On the Status Display” on page 11
L.METER Audio level meter display
*6
TIME CODE Time code display Off On
SOURCE ID
→ “SOURCE ID” in “INFORMATION” on page 24
*7
PARA.WFM Displays the wave form monitor (Normal or Parallel)
*8
PARA.VS Displays the vector scope (Normal or Parallel)
BAL.WFM
Displays the wave form monitor (Normal or Difference)
BAL.VS Displays the vector scope (Normal or Difference)
COLOR OFF Color off Color Monochrome
SCR CHECK Screens check
*9
I/P MODE Change a mode according to the input picture
*10
MUTING Muting on/off Off On
DIMMER Change the intensity of the button lamps NORMAL DARK
−−− No function — —
*3
The 3D format changes in the same way as the SELECT button pressed in 3D mode.
*4
Selects which functions in “MARKER” are activated, non-“R-” items or “R-” items (→ “MARKER” on page 20).
*5
Displays the information shown when INPUT SELECT button of the current input is pressed (→ “On the Status Display” on page 11). While
controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.
*6
While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When
“LEVEL METER ch” is set to “OFF,” the level meter is not displayed (“NO EFFECT” appears). While controlling with the TRIGGER system, the
pattern of the audio channel display is switched.
*7
While controlling with the MAKE system, the available set-up options will be the setting value currently selected in “SOURCE ID” (“ON” or
“AUTO” [short-circuiting]) and “OFF” (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-
UP MENU (→ “SOURCE ID” in “INFORMATION” on page 24).
*8
While controlling with the TRIGGER system, the display mode changes in the same way as for the normal SCOPE function. (→ e on page 9)
While controlling with the MAKE system, the displayed (short-cirtuiting)/hidden (opening) operations are performed as follows regardless of
the MAIN MENU “AUTO OFF” setting:
[PIN 1] − [PIN 5] settings
Priority when the settings a re configured simultaneously
Display PARA.WFM PARA.VS BAL.WFM BAL.VS
MIX
mode
Invalid
Wave form
monitor
Vector
scope
Wave form
monitor
Vector
scope
Wave form monitor > Vector scope
Valid
Parallel
wave form
monitor
Parallel
vector
scope
Difference
wave form
monitor
Difference
vector
scope
Parallel wave
form monitor
>
Difference wave
form monitor
>
Parallel
vector scope
>
Difference
vector scope
*9
While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While
controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (→ w on page 9).
*10
Must be controlled with the TRIGGER system. The mode changes in the order of “NORMAL” → “CINEMA” → “FIELD” (This function cannot be
controlled with the MAKE system).
● You cannot assign the same function to different pin terminals.
● The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.