Filter
Top Products
8
Front panel
1 Speakers (stereo)
The speakers emit the same audio signal emitted from the
AUDIO MONITOR OUT terminals.
(→
7 “AUDIO MONITOR OUT(OUT (L), OUT (R)) terminals” on
page 7)
2 VOLUME adjustment knob
Adjusts the volume.
3 Picture adjustment knob
CHROMA: Adjusts the picture color density.
BRIGHT: Adjusts the picture brightness.
CONTRAST: Adjusts the picture contrast.
● CHROMA cannot be adjusted for certain signal
formats.
4 POSITION knob/PUSH SEL. button
POSITION knob: Adjusts the positions of the display line
and R image.
Used for the following functions
• 3D cursor (→ page 16)
• SPLIT (→ page 15)
• LR SEQ. (→ page 15)
• R SHIFT (→ page 15)
• ANAGLYPH (→ page 15)
• INDIVIDUAL (→ page 15)
PUSH SEL. button: Switches the display line.
Used for the following functions
• 3D cursor (→ page 16)
• SPLIT (→ page 15)
● To reset the displayed line and R image to default,
press and hold the PUSH SEL. button for 3 seconds
or longer.
Daily Operations
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
• You can select the color of the tally lamp from “GREEN” or “RED.”
(→ “TALLY SELECT” in “FUNCTION SETTING” on page 23 and “External Control” on page 26)
• “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even
when the function does not actually work).
• You cannot use the buttons for the items controlled by the MAKE system (“REMOTE ON” appears, and the lamp does not light up).