Filter
Top Products
19
MAIN MENU
PICTURE FUNCTION
Setting for the picture quality.
Item Content Setting value
APERTURE
*1
Activates/deactivates the function at the level set in “APERTURE LEVEL.” OFF, ON
APERTURE LEVEL
*1
Simultaneously corrects the frequency characteristics of the RGB colors. 01 – 10
I/P MODE
Selects a proper mode corresponding to the input picture. NORMAL, CINEMA, FIELD
sub menu
Display the sub menu which enables you to adjust the items of “PICTURE FUNCTION” while viewing the actual picture.
reset
Restore the default settings for all the items in “PICTURE FUNCTION.”
*1
Memorized for each input.
BACK LIGHT Setting value: -20 – +20
Adjusts the brightness of the display.
3G SDI LEVEL B Setting value: DS1, DS2
Selects the data stream from two HD SDI signals multiplexed when a 3G SDI LEVEL B signal comes in.
● The setting value will be invalid if a 3G SDI LEVEL B DUAL LINK signal is input.
SDI DUAL LINK Setting value: OFF, ON
Activates/deactivates the DUAL LINK function of SDI signals.
● “DUAL LINK” is displayed when the setting is set to “ON.” (→ “Status indication of DUAL LINK/3G SDI signal information” on page 11)
● Set this setting to “OFF” when an SDI signal other than DUAL LINK SDI is input.
3D SETTING
3D function settings.
Item Content Setting value
SDI FORMAT 1
*1
Set the first choice for 3D format in SDI input.
The setting values and features are as follows.
LbL-RL
LbL-LR
SbS-HD-LR
SbS-HD-RL
SbS-SD-LR
SbS-SD-RL
LbL-RL
LbL-LR
SbS-HD-LR
SbS-HD-RL
SbS-SD-LR
SbS-SD-RL
:
:
:
:
:
:
LINE BY LINE, the first line: R image
LINE BY LINE, the first line: L image
SIDE BY SIDE compressed horizontally, L image on the left
SIDE BY SIDE compressed horizontally, R image on the left
SIDE BY SIDE not compressed, L image on the left
SIDE BY SIDE not compressed, R image on the left
• When the 3D mode is “ON” in 3D input, pressing the SELECT button switches between
“FORMAT1” and “FORMAT2.”
SDI FORMAT 2
*1
Set the second choice for 3D format in SDI input.
DVI FORMAT 1
*1
Set the first choice for 3D format in DVI input.
DVI FORMAT 2
*1
Set the second choice for 3D format in DVI input.
SINGLE IMAGE
*1
Select a channel to be displayed when the 3D mode is “ON.” OFF
LEFT
RIGHT
OFF
LEFT
RIGHT
:
:
:
Normal 3D (Left and right images)
L image only
R image only
FRAME SYNC.
Synchronize the left and right input signals by forcibly locking the SDI IN 2/R input for the SDI IN 1/L
input in MIX mode.
• The time base cannot be corrected on this product. To take 3D images strictly, perform
GENLOCK on the shooting device, and set this setting to “OFF.”
• When “ON” is selected, the playback proceeds one frame later than when “OFF” is selected.
OFF
ON
FAR LIMIT
Set the limit of the depth in Cursor mode of “3D cursor.”
• The line color changes when the difference between the vertical lines goes beyond the
specified range.
– 0.1% – – 4.0%
NEAR LIMIT
Set the limit of the pop-up level in Cursor mode of “3D cursor.”
• The line color changes when the difference between the vertical lines goes beyond the
specified range.
+01% – +20%
L. INTENSITY Set the intensity of lines displayed in the CAMERA ASSIST MENU and “3D cursor.”
• When “LOW” is selected, the grid lines are displayed translucent in Grid mode of “3D
cursor.”
HIGH
LOW
*1
Works when the MIX mode is “OFF” or invalid.