Filter
Top Products
21
AUDIO SETTING
Settings for the audio output balance, EMBEDDED AUDIO signals and level meter.
Item Content Setting value
BALANCE
Adjust the balance between the right and left speakers. L5 – L1, 0, R1 – R5
E.AUDIO GROUP
*1
Select the audio channel group of the EMBEDDED AUDIO signals.
The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.
1G
2G
1-2G
3G
1-3G
1G
2G
1-2G
3G
1-3G
:
:
:
:
:
Channel 1/2/3/4/1+2/3+4/1 – 4 (1G)
Channel 5/6/7/8/5+6/7+8/5 – 8 (2G)
Channel 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)
Channel 9/10/11/12/9+10/11+12/9 – 12 (3G)
Channel 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/
1 – 4 (1G)/5 – 8 (2G)/9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)
• G means GROUP
LEVEL METER SETTING
*1
Adjust the level meter display for the EMBEDDED AUDIO signals.
Example of the level meter display —Level meter position and audio channels
Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”
• The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”
• You can select the position of the level meter display—top or bottom of the screen (→ “POSITION” in
“INFORMATION” on page 24).
• When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period
of time.
– LEVEL METER ch
Select how the audio channels are displayed on the level meter. OFF
LINE
DIVIDE
LINE
DIVIDE
:
:
Displays the channels 1 – 6 at the left of the screen and 7 – 12 at the right.
Displays the odd channels at the left of the screen and the even channels at
the right.
– BAR TYPE
Select the color of the level meter display. 3COLORS
W.100
3COLORS
W.100
:
:
Coloring for each level
White
– REFERENCE LEVEL
Select the standard input level indicated on the level meter. −20dB, −18dB
– OVER LEVEL
Select the input level’s lower limit indicated in red for the “3COLORS” display. −10dB, −8dB,
−6dB, −4dB, −2dB
– BAR BRIGHTNESS
Select the brightness of the level meter. LOW, HIGH
– PEAK HOLD
Activates/deactivates the peak hold function of the level meter. OFF, ON
*1
Memorized for each input. In MIX mode, the setting only applies to audio signals input into SDI IN 1/L.
Green
REFERENCE LEVELOVER LEVEL
Red
Yellow