Filter
Top Products
ENGLISH
33
Continued on the next page
Symptoms Remedies/Causes
MP3/WMA playback
• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
• Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
• A longer readout time is required (“File
Check” keeps flashing on the display).
Do not use too many hierarchies and folders.
• Tracks do not play back in the order you have
intended them to play.
Playback order is determined when the files are recorded.
• Elapsed playing time is not correct. This sometimes occurs while playing. This is caused by how
the tracks are recorded on the disc.
• “No Files” appears on the display. Insert a disc that contains MP3/WMA tracks.
• “Not Support” appears on the display and
track skips.
Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.
• “No Music” appears on the display. Change the disc that contains MP3/WMA tracks.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (capital: A – Z, small:
a – z), numbers, and a limited number of symbols and
special characters (see page 31).
SD card/USB memory playback
• Noise is generated. The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• “File Check” keeps flashing on the display. • Readout time varies depending on the device.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
• “No Files” appears on the display. Play a device that contains tracks encoded in an
appropriate format.
• “Not Support” appears on the display and
track skips.
The track is unplayable.
• “Read Failed” appears on the display, then
returns to the previous source.
• The device may be malfunctioning, or may not have
been formatted correctly.
The files included in the device are corrupted.
• Do not pull out or attach the USB memory repeatedly
while “File Check” appears on the display.
EN30-37_SH1000U_001A_2.indd 33EN30-37_SH1000U_001A_2.indd 33 1/6/06 2:59:49 PM1/6/06 2:59:49 PM