JVC KD-SH1000 Car Stereo System User Manual


 
21
ENGLISH
Indications Items Settings, [reference page]
Bright
Display brightness
110 [Initial: 8] : Adjust the display contrast to make the display indications clear
and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes
no effect.)
ID3 Tag
Tag display
On [Initial]
Off
: Shows the Tag information while playing MP3/WMA tracks.
: Cancels.
Theme
Display theme
Large
(1 [Initial] or 2)
Small
(1 [Initial] or 2)
: Select the display theme for large graphic display, [5]. See page 22
for setting.
: Select the display theme for small graphic display, [5]. See page 22
for setting.
IF Band
Intermediate frequency
band
Auto [Initial]
Wide
: Increases the tuner selectivity to reduce interference noises
between close stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Beep
Key-touch tone
On [Initial]
Off
: Activates the key-touch tone.
: Deactivates the key-touch tone.
Ext In*
2
External input
Changer [Initial]
Ext In
: To use a JVC CD changer, [14] or an Apple iPod or a JVC D. player,
[24].
: To use any other external component, [26].
Tel
Telephone muting
Muting 1/
Muting 2
Off [Initial]
: Select either one which mutes the sounds while using a cellular
phone.
If CD/CD-CH/SD/USB/iPod/D. player has been selected as the
source, playback pauses during telephone muting.
: Cancels.
Amp Gain
Amplifier gain control
High PWR
Low PWR
Off
: Volume 00 – Volume 50
: Volume 00 – Volume 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speakers.)
: Deactivates the built-in amplifier.
*
1
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
2
Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
EN16-21_SH1000U_001A_f.indd 21EN16-21_SH1000U_001A_f.indd 21 1/26/06 2:04:19 PM1/26/06 2:04:19 PM