JVC KD-SH1000 Car Stereo System User Manual


 
ENGLISH
37
Continued on the next page
Sound adjustments
Selecting the DSP modes—DSP
Effectiveness of “V.Cancel” depends on the
recording condition of the sources:
– Monaural sources such as AM and
monaural FM broadcasting programs.
– Multiplex sound sources.
– Sources recorded with duets, strong echo, a
chorus, or only a few instruments.
When “4ch” is selected, rear speakers are
used only to reproduce reflections and
reverberations in order to creates a being-
there feeling in your car compartment.
If fader or balance has been set close to
its extreme, appropriate effect may not be
obtained.
You cannot adjust the effect level and speaker
number when “Defeat” is selected with
crossover network activated.
Storing your own sound modes
If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press
MENU to go back to the operation screen
of the current source. Adjustment you made
remains effective until you select a sound
mode.
Setting the sound modes—SEL
If you are using a two-speaker system, set the
fader level to the center.
Subwoofer out setting takes effect only when a
subwoofer is connected.
You cannot change the input level—
“VolAdjust” of the FM stations. If the source
is FM, “Fix” will appear when you try to adjust
it.
General settings — PSM
“Auto Dimmer” may not work correctly on
some vehicles, particularly on those having a
control dial for dimming. In this case, change
the “Dimmer” setting to any one other than
“Auto.”
If you change the “Amp Gain” setting from
“High PWR” to “Low PWR” while the volume
level is set higher than “Volume 30,” the unit
automatically changes the volume level to
“Volume 30.”
Title assignment
If you try to assign titles to more than 30
discs, “Name Full” appears. Delete unwanted
titles before assignment.
Titles assigned to discs in the CD changer can
also be shown if you play back the disc in the
unit and vise versa.
iPod® or D. player operations
When you turn on this unit, the iPod or
D. player is charged through this unit.
While the iPod or D. player is connected, all
operations from the iPod or D. player are
disabled. Perform all operations from this
unit.
The text information may not be displayed
correctly.
– Some characters such as accented letters
cannot be shown correctly on the display.
– Depends on the condition of
communication between the iPod or
D. player and the unit.
If the text information includes more than
16 characters, it scrolls on the display (see
also page 23). This unit can display up to 40
characters.
Notice:
When operating an iPod or a D. player,
some operations may not be performed
correctly or as intended. In this case, visit the
following JVC web site:
For iPod users: <http://www.jvc.co.jp/
english/car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
DAB tuner operations
Only primary DAB services can be presetted
even when you store a secondary service.
A previously preset DAB service is erased
when a new DAB service is stored in the same
preset number.
EN36-43_SH1000E_003A_4.indd 37EN36-43_SH1000E_003A_4.indd 37 1/6/06 6:38:44 PM1/6/06 6:38:44 PM