JVC KD-SH1000 Car Stereo System User Manual


 
32
ENGLISH
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The unit does not work at all. Reset the unit (see page 2).
“Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 26).
“Push Reset” appears on the display and the
control panel movement is freezed.
Reset the unit (see page 2). If this does not work, check the
installation.
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which you
used for recording.
Disc can be neither played back nor ejected. Unlock the disc (see page 14).
Eject the disc forcibly (see page 2).
Disc cannot be recognized (“No Disc,” “Loading
Error,” or “Eject Error” appears).
Eject the disc forcibly (see page 2).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
EN30-37_SH1000U_001A_2.indd 32EN30-37_SH1000U_001A_2.indd 32 1/6/06 2:59:49 PM1/6/06 2:59:49 PM