Filter
Top Products
38
ENGLISH
Symptoms Remedies/Causes
General
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all. Reset the unit (see page 2).
• “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 33).
• “Push Reset” appears on the display and the
control panel movement is freezed.
Reset the unit (see page 2). If this does not work, check the
installation.
FM/AM/RDS
• SSM automatic presetting does not work. Store stations manually.
• Static noise while listening to the radio. Connect the aerial firmly.
• “No Text” appears on the display. The station does not support RDS RT or the reception is
weak.
Check the Network-Tracking Reception (see page 13).
• “Loading” does not disappear. The receiving signal is temporarily too weak to receive a
complete message although the service is available.
Check the Network-Tracking Reception (see page 13).
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Preset frequency level settings for each sound mode
Sound mode
Preset equalizing value
63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
12.5 kHz
Flat 00 00 00 00 00 00 00 00 00
Hard Rock +06 +06 +04 +02 00 00 +02 +04 +02
R&B +06 +04 +04 +04 00 +02 +02 +02 +06
Pop 00 +04 +02 00 00 +02 +02 +02 +04
Jazz +06 +04 +02 +02 +02 +02 +02 +06 +04
Dance +08 +04 +02 00 –04 –02 00 +02 +02
Country +04 +02 00 00 00 00 00 +02 +04
Reggae +06 +02 00 00 +02 +04 +04 +04 +06
Classic +04 +06 +04 +02 00 00 +02 +04 00
User 1 00 00 00 00 00 00 00 00 00
User 2 00 00 00 00 00 00 00 00 00
User 3 00 00 00 00 00 00 00 00 00
EN36-43_SH1000E_003A_3.indd 38EN36-43_SH1000E_003A_3.indd 38 12/30/05 5:36:14 PM12/30/05 5:36:14 PM