8 Introduction
2. Fold the handle to the desired position.
Keep the red rings pushed and fold
the handle down
3. Release the two red rings.
4. To set the handle to the straight position again, simply do the opposite.
Turning the instrument on
Here is how to turn the MP-10 PRO on.
1. Connect the supplied AC cable to the power supply unit.
2. Connect the power supply unit to the DC 12V connector on the back of the device.
Warning: Use only the supplied adapter, or an adapter suggested by Korg. Other
adapters may look similar, but they may damage your instrument.
3. Connect the AC power cable to a reliable power socket.
4. Press the POWER button to turn on the power to the MP-10 PRO. When
you turn the device on, a series of setup data must be automatically loaded
rst, and this will take some time, which depends on the amount of data to
be loaded.