Korg MP-10 PRO Car Video System User Manual


  Open as PDF
of 252
 
TheVoiceProcessorPresets 149
4. Touch the MIC 1 or MIC 2 tab to select the reverb level that’s applied to
the corresponding microphone input. Use the Reverb Level knob to set the
level.
5. Choose the reverb type by using the Type pop-up menu.
Reverb Type Notes and parameters
Hall Thishall-typereverbsimulatesthereverberationofmid-sizeconcert
hallsorensemblehalls.
SmoothHall Thishall-typereverbsimulatesthereverberationoflargerhallsand
stadiums,andcreatesasmoothrelease.
Wet Plate Thisplatereverbsimulateswarm(dense)reverberation.
DryPlate Thisplatereverbsimulatesdry(light)reverberation.
Room Thisreverbsimulatesasmallroom.
Bright Room Thisroom-typereverbemphasizestheearlyreflectionsthatmake
thesoundbrighter.
EarlyReflections Thiseffectisonlytheearlyreflectionpartofareverberationsound,
andaddspresencetothesound.ByusingtheTypeknob,youcan
selectoneoffourdecaycurves.
6. Use the PreDelay knob to set the distance of the wall, and the Reverb Time
knob to set the size of the room. Use the Pre L.EQ Gain knob to equalize
the low frequencies, and the Pre H.EQ Gain to equalize the high frequen-
cies and set the material of the reecting surface.
7. Touch the SAVE command to save the settings to a Voice Processor Preset
(more info below).
8. Press the EXIT button to return to the main screen.
 previous next