Filter
Top Products
124 Part8:TheMicrophone
Adjusting the microphone’s volume
After setting the input gain, adjust the volume of the microphones in the mix.
Adjusting the volume of each microphone
Use the MIC volume level controls on the front panel to mix the microphone
with the other sound sources.
1. Play a Song, and/or play some Sounds on the keyboard (if is it connected).
2. While the other sound sources (Songs, Sounds) are playing, sing or speak
into the microphone.
3. Use the corresponding MIC level control to adjust the microphone level.
Note: The microphones’ level controls can also be accessed via the Mixer > Voice
Processor Setup page.
While turning the MIC knob clockwise, check the level in the master vol-
ume indicator on the control panel. The indicator should stay in the orange
area while you sing or play at the maximum level and dynamics.
Don’t let the level indicator go into the red, or the audio signal will distort.
If the red indicator turns on, lower the MIC level a little, until the indicator
returns to the orange area.