Filter
Top Products
10 Introduction
Basic user interface setup
Before using your MP-10 PRO in a performance environment, you can cus-
tomize the way you will interact with it.
Calibrating the touch panel
The touch panel can be calibrated to respond to your preferred touch pressure.
Please note that heavy touches are not necessary, as the screen is very respon-
sive by design.
1. Press the GLOBAL button to access the Global Menu.
2. Touch the TOUCH PANEL button on the display to access the Touch Panel
Calibration page.
As an alternative, you can access this page by keeping the QUICK ACCESS
KEY pressed, then pressing the GLOBAL button.
3. Touch the upper left corner of the display, where indicated by the arrows.
4. When the arrows move to a different corner, touch them.
5. When done, the SAVE button on the display becomes green. Touch it to
save the new calibration.