Filter
Top Products
16
206-4261
Express Script Installer Menu Wizard (Cont.)
(Continued from previous page)
Note: You MUST select Execute Auto Search and press
OK in order to run the channel scan. If you move on to
the next step without running the Auto Search, there will
be no analog or digital channels in the channel lineup
(Channel Map). In this case, upon completion of the
Express Script, the only channels in the resulting PTC
Channel Map will be any enabled Aux inputs.
7. Edit the Channel Map.
This option enables you to add/delete channels, select channel icons,
add channel labels, and/or set up channel banks before the Channel
Map is transferred to the commercial controller (PTC) in step 8.
Note: The maximum number of channels (analog, digital,
and Aux inputs) that can be transferred to the PTC is 141.
An attempt to transfer more than 141 channels of any
combination will result in a PTC Channel Map of exactly
141 channels; any extra channels will not be available in
the PTC Channel Map. For example, if you enabled three
Aux inputs in step 2 and Auto Tuning found 141 channels,
you must edit the Channel Map to decrease the number
of analog/digital channels to (at most) 138 in order to
accommodate the Aux inputs in the PTC Channel Map.
Note that Aux inputs will appear between the highest
analog and lowest digital channel number in the PTC
Channel Map.
Select Edit Channel Map and press OK on the Installer Remote to
edit the Channel Map, as necessary. Channel edit options will be
displayed in a pop-up window (see example at right). Use the Up/
Down arrow keys to navigate between elds:
• CH \ Input: Edit the channel lineup, as necessary, to include only
free to guest (non-encrypted) channels. Use the Left/Right arrow
keys on the Installer Remote to select channels, and press OK to
add/delete channels per your system requirements.
• Icon: Use the Left/Right arrow keys or key in the icon number to
select the appropriate trademark/icon for each channel’s Channel-
Time on-screen display. Icons are available for familiar channels,
such as ABC, CBS, NBC, etc. Identiable icons should enable the
end user to readily know what common networks are available.
• Label: Press OK to display the alphanumeric keypad, and add
custom text labels for each channel, as desired. Added custom
labels will be displayed above the Label/Keypad eld for each
channel, as applicable.
• Bank: Use the arrow keys to dene channel banks, as desired.
See pages 37 to 40 for further information on channel banks.
Installer Menu Wizard
Step 7. Channel Map Edit
Edit Channel Map
PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279
Back
Next
OK
Exit
CC
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Would you like to edit channel map and icons?
(Continued on next page)
Installer Menu Wizard
Step 7. Channel Map Edit
Edit Channel Map
PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279
Back
Next
OK
Exit
CC
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Would you like to edit channel map and icons?
•
CH \ Input
•
Icon
•
Label
•
Bank
DIGITAL 2-1
Keypad
You can also use numeric keys to direct enter Icon
number (0–212)
Searched CH: 135 / Enabled Aux: 5 / Added CH: 128 / Added Aux: 5
* You can add up to 141 channels (Aux added as analog).
No Logo
►
►
Add/Delete
Move
Exit
MENU
►
►
NORMAL
1
ADDED
2
ADDED
3
ADDED
4
ADDED
Note: The total number of channels
found (“Searched”) during Auto Tuning
is indicated at the top of the display.