Filter
Top Products
42
206-4261
Cloning Procedures (Cont.)
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Insert the USB memory device into the USB port on the Master TV.
3. Press MENU on the Installer Remote to display the TV setup menus.
Use the arrow navigation keys to select/highlight the Option menu icon,
and then press the number “7” key a total of seven times to display the
TV Manager / USB Download Menu.
4. To gain access to the “Learn From TV” options in the TV Manager / USB
Download Menu, key in the following number sequence on the Installer
Remote: 9-8-7-6.
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and then
press OK.
6. In the Learn From TV (TLX) window, to differentiate this TLX le from
others, you can use the Up/Down arrow keys to change the last ve
digits of the lename. Press OK when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. Do
NOT remove the USB device until Learning is complete. When the
Learning process is complete, the TV Manager / USB Download Menu
will reappear on the screen.
7. When Learning is done, press CC or on the Installer Remote to exit
the TV Manager / USB Download Menu, and remove the USB memory
device from the Master TV.
Teach Master TV Setup to Target TV
Note:
You may also use the Ez Download utility to complete the Teaching
process, if desired. See “Ez Download Utility” on pages 18 to 20 for further
information.
1. Turn ON the Target TV.
The next step depends on whether the Express Script Installer Menu
Wizard appears on the screen:
• If the wizard is displayed, the TV is in the required factory default state.
Exit the wizard, and then, go to step 3.
• Otherwise, ensure the Target TV is in Pass-through Mode, and then
continue with step 2.
2. Use the Installer Remote to access the Target TV Installer Menu (see
“Accessing the Installer Menu” on page 21 for further information). Set
Installer Menu item 117 FACT DEFAULT to 1, and press OK. When
the value changes back to 0, press OK again to exit the Installer Menu.
This step restores factory default settings on the TV.
Learn From TV (TLX)
OK
Select the le name and press OK to start
xxLY560M-UA00001.TLX
►
►
Learn From TV (TLX)... 25
%
Do not remove the USB from the port! Do not unplug!
xxLY560M-UA00001.tlx
Previous
CC
TV Manager
USB
Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Teach To TV (TLL)
Learn From TV (TLX)
Learn From TV (TLL)
OK
Previous
CC
(Continued on next page)