Filter
Top Products
50
206-4261
Learning FTG Conguration from a TV
To ensure that decryption of Pro:Idiom encrypted channels is enabled, it is
recommended that you create an FTG Configuration file using the FTG File
Manager as described on pages 46 to 47. However, if necessary, there is an
option to save (Learn) an FTG Configuration file from an LY560M TV to a
USB memory device.
The option to save (Learn) an FTG Conguration le from a TV may be
desirable or required in either or both of the following situations:
• If you want to save customized TV setup menu settings to the FTG
Conguration le, in addition to the FTG Channel Map and FTG Installer
Menu settings.
• If you do not know the RF channels at the site, and you would like to use
the TV to search for the available RF channels.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• If the TV is NOT already in FTG Mode, you may need to perform some
manual conguration on the TV before you start this procedure (see
“Optional Manual Conguration / TV Setup” on next page).
• If you intend to use the TV Zoning feature, make sure to assign the
appropriate TV Zone # as described in Reference section, “Using the TV
Zoning Feature,” BEFORE continuing with the procedure below.
Caution: Do not unplug the TV power cord or remove/disconnect
the USB memory device while Learning, as doing so may cause
the TV to malfunction or harm the USB device, respectively.
Learn FTG Conguration from Master TV
1. Turn ON the TV, and then insert a USB memory device into the USB port
on the Master TV.
2. Press MENU on the Installer Remote to display the TV setup menus (TV is
in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option menu
icon from the TV setup menus or the Lock menu icon from the Function
Menu. Then, press the number “7” key a total of seven times to display the
TV Manager / USB Download Menu.
4. To gain access to the “Learn From TV” options in the TV Manager / USB
Download Menu, key in the following number sequence on the Installer
Remote: 9-8-7-6.
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and then
press OK.
FTG Mode of Operation (Cont.)
(Continued on next page)
Learn From TV (TLX)
OK
Select the le name and press OK to start
xxLY560M-UA00005.TLX
►
►
Learn From TV (TLX)... 25
%
Do not remove the USB from the port! Do not unplug!
xxLY560M-UA00005.tlx
Previous
CC
TV Manager
USB
Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Teach To TV (TLL)
Learn From TV (TLX)
Learn From TV (TLL)
OK
Previous
CC