Filter
Top Products
45
206-4261
Cloning Procedures (Cont.)
Teach Master TV Setup to Target TV
Note:
You may also use the Ez Download utility to complete the Teaching
process, if desired. See “Ez Download Utility” on pages 18 to 20 for further
information.
1. Turn ON the Target TV.
The next step depends on whether the Express Script Installer Menu
Wizard appears on the screen:
• If the wizard is displayed, the TV is in the required factory default
state. Exit the wizard, and then, go to step 3.
• Otherwise, ensure the Target TV is in Pass-through Mode, and then
continue with step 2.
2. Use the Installer Remote to access the Target TV Installer Menu (see
“Accessing the Installer Menu” on page 21 for further information). Set
Installer Menu item 117 FACT DEFAULT to 1, and press OK. When the
value changes back to 0, press OK again to exit the Installer Menu.
This step restores factory default settings on the TV.
3. Tune/set the TV to an analog or digital channel or Aux input (ideally the
same source tuned for 2-5-5 + MENU Mode during the Custom Master
TV Setup procedure, if applicable).
4. Insert the USB memory device with the TLL le into the Target TV’s USB
port.
5. Press MENU on the Installer Remote to display the TV setup menus, use
the arrow navigation keys to select/highlight the Option menu icon, and
then press the number “7” key a total of seven times to display the TV
Manager / USB Download Menu.
6. With the TV Manager / USB Download Menu on display, use the Up/
Down arrow keys to select Teach To TV (TLL), and then press OK.
7. In the Teach To TV (TLL) window, use the Up/Down arrow keys to
select the Master TV Setup you want to install.
Note: Filenames for TLL les Learned from a TV are comprised of the TV
model and a ve-digit number, for example, xxLY560M-UA00003.TLL.
8. Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do
NOT remove the USB device until Teaching is complete. When the
Teaching process is complete, the TV will briey display a “Teaching
Completed” window and then exit the TV Manager / USB Download
Menu.
9. Remove the USB device, and verify that the Master TV Setup is now
resident on the Target TV.
After the Teaching process is complete, the TV tunes according to the
setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a
Start Channel is specied, the TV will tune to that channel; otherwise, the
TV will return to the last channel tuned.
Updating TLL File... 50
%
Do not remove the USB from the port! Do not unplug!
xxLY560M-UA00003.tll
TV Manager
USB
Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Teach To TV (TLL)
OK
Previous
CC
Teach To TV (TLL)
xxLY560M-UA00003.TLL
OK
Previous
CC