Filter
Top Products
Windows CE Programs
M000174-19 63
7.8 FILE SERVER
With Windows CE 5.0 a file server is contained in the device.
Note:
Further information on the functionality of the file server is provided in the Microsoft MSDN
documentation.
7.8.1 G
ENERAL SETTINGS
The following registry settings control the functionality of the file server (see also chapter Registry
Editor).
Note:
Changes to the registry entries are not active until the next restart of the file server (see File server
start/stop) of the file server.
The dword entries are in hexadecimal format (see also chapter Sample settings).
Registry entries under [HKEY_LOCAL_MACHINE\Services\Smbserver\Shares]:
Entry Type Description
UseAuthentication dword Set to 1 by default.
If this value is set to 0 (not recommended), the authentication on the file
server is deactivated and all users on the network have access to all
enables.
Observe the instructions of chapter
Use without authentication.
7.8.2 VIRTUAL
DIRECTORY SETTINGS
These registry entries contain the mapping between the virtual directories in the file server and the
physical directories on the device.
Note:
Changes to the registry entries are not active until the next restart (see File server start/stop) of the file
server.
The dword entries are in hexadecimal format (see also chapter Sample settings).
Registry entries under [HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\«Enablename»]:
Entry Type Description
Path string Specified directory which is enabled.
Type dword 0 for file enable
1 for print enable (not supported)
UserList string Specifies a comma-separated list of authorized users.
These must be created via the
User Administration (UserAdmin).
This entry is ignored if UseAuthentication = 0 is set.