Filter
Top Products
Programs Windows CE
70 M000174-19
7.12 BACKGROUND PICTURE (WALLPAPER)
Use this application to select a background picture for the desktop. Only the BITMAP (*.BMP) file
format is supported. The command line call is as follows:
wallpaper.exe –b «file name including the path»
For example:
wallpaper.exe –b \storagecard\wince.bmp
Note:
The setting is lost after a device is restarted. The call for the background picture must be inserted in
the Autoexec.bat file so that the background picture is transferred again after a restart. Bitmap files
with a color depth of 8, 16 or 24 Bpp (bits per pixel) are supported. The bitmap should not exceed the
maximum size of the screen resolution.
7.13 CF BACKUP
This application enables GALILEO and PLC projects to be copied from one Flash card to another. The
operating system (OS directory) and the files
Autoexec.bat and Autoexec.reg can also be saved.
The following options are available after the CFBackup.exe program is started:
The source directory and the destination directory are selected in Source and Destination
respectively. Normally «\StorageCard» is the destination directory for the Flash card. Touch Backup
to start the save operation. A prompt will first of all ask you to insert the source Flash card. The source
Flash card is then read and is copied either directly to the destination Flash card or to a temporary
directory. If the Source and Destination directories are the same, the user is asked to enter the
destination Flash card. Depending on the volume of data to be copied, the request to insert the source
or destination directory will appear several times until the copy operation has been completed.
Note:
The Compact Flash or PCMCIA drives can be found at the directories \StorageCard,
\StorageCard2.See also chapter File system.