Filter
Top Products
Notes
! The number in the
2
mark on a DVDs pack-
age indicates the number of recorded subtitle
languages.
! With some DVDs, switching between subtitle
languages may only be possible using a menu
display.
! You can also switch between subtitle lan-
guages using DVD SETUP. For details, refer to
Setting the subtitle language on page 52.
! Pressing SUBTITLE (SUB.T) during fast for-
ward/fast reverse, pause or slow motion play-
back returns you to normal playback.
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during play-
back.
! During playback of a scene shot from mul-
tiple angles, the angle icon
is dis-
played. Turn angle icon display on or off
using DVD SETUP. For details, refer to Set-
ting angle icon display on page 54.
% Press ANGLE during playback of a scene
shot from multiple angles.
Each time you press ANGLE it switches be-
tween angles.
Notes
! The
3
mark on a DVDs package indicates it
features multi-angle scenes. The number in
the
3
mark indicates the number of angles
from which scenes were shot.
! Pressing ANGLE during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback.
Resume playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
! To perform this function, switch the remote
control operation mode to DVD. (Refer to
page 15.)
% During playback, press
BOOKMARK (BOOK.M) at the point you
want to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold BOOKMARK (BOOK.M) during playback.
# You can also bookmark a disc by pressing and
holding EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press EJECT.
Selecting audio output
You can switch between stereo and monaural
audio output.
! This function is possible only with Linear
PCM sound.
! This function is not possible when disc
playback has been stopped.
1 Use the joystick to select L/R SELECT.
2 Use the joystick to select L+R (left and
right), LEFT (left) or RIGHT (right).
Playing DVD video discs
En
28
Section
05