Filter
Top Products
1 Use the joystick to select A SUB TITL in
LANGUAGE.
2 Move the joystick up to turn assist sub-
titles on.
# To turn assist subtitles off, move the joystick
down.
Setting angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1 Use the joystick to select M. ANGLE in
VISUAL.
2 Move the joystick up to turn angle icon
display on.
# To turn angle icon display off, move the joy-
stick down.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TVaspect
for the display connected to REAR VIDEO
OUTPUT.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16: 9
may result in an unnatural picture.
! If you select the TVaspect, the units dis-
play changes to the same setting.
1 Use the joystick to select TV ASPECT in
VISUAL.
2 Use the joystick to select the TVaspect.
Move to change the TVaspect; click to select.
! 16: 9 Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PANSCAN The picture is cut short at the
right and left of the screen
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX
even if you select PANSCAN setting. Confirm
whether the disc package bears the
16 : 9 LB
mark. (See page 10.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the discsin-
structions.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict the viewing of violent and adult-
oriented scenes by children. You can set the
parental lock level in steps as desired.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1 Use the joystick to select PARENTAL in
VISUAL.
2 Press 09 to input a four digit code
number.
Setting up the DVD player
En
54
Section
11