Pioneer AVX-P7650DVD Car Video System User Manual


 
4 Move the joystick right to move the
cursor to the next character position.
When the desired letter is displayed, move the
joystick right to move the cursor to the next po-
sition and then select the next letter. Move the
joystick left to move backwards in the display.
5 Move the cursor to the last position by
moving the joystick right after entering the
title.
When you move the joystick right one more
time, the entered title is stored in memory.
6 Press BAND/ESC to return to the play-
back display.
Switching the background
display
You can switch background displays while lis-
tening to each source.
! In the following cases, the background dis-
play will not change:
When AV INPUT1 (video input 1) and/or
AV INPUT2 (video input 2) are not set to
VIDEO (refer to page 60).
When the DVD/Video CD playback is not
turned on for rear display (refer to page
18).
! Dolphin movie will not appear when the list
is displayed.
IP-BUS mode (S)
% Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Video of currently selected sourceDOLPHIN
(background visual)AV-1 (video input 1)
AV-2 (video input 2)DVD (DVD player)
# When this player which is turned off is se-
lected as a source, you cannot use
ENTERTAINMENT.
Note
When the selected source is an audio source,
when you select the video of currently selected
source, nothing is displayed on the display.
ADD-ON mode (M)
% Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Audio source
Background still pictureBGV (background
visual)AV-1 (video input 1)AV-2 (video
input 2)DVD (DVD player)
Video source
Video of currently selected sourceback-
ground still pictureBGV (background visual)
AV-1 (video input 1)AV-2 (video input 2)
DVD (DVD player)
Using the PGM button
You can operate the preprogrammed functions
for each source by using
BOOKMARK(BOOK.M).
! Only when using this unit with ADD-ON
mode (M), you can operate this function.
% Press BOOKMARK(BOOK.M) to turn
pause on when selecting the following
sources:
! Built-in DVD player
! Multi-CD Player
# To turn pause off, press
BOOKMARK(BOOK.M) again.
Other Functions
En
63
Section
13
Other Functions