Filter
Top Products
Problems during Video CD playback
Symptom Cause Action (See)
The PBC (playback control)
menu display cannot be called
up.
The Video CDplaying does not fea-
ture PBC.
This operation is notpossible with VideoCDs
not featuring PBC.
Repeat play andtrack/time
search are not possible.
The Video CDplaying features PBC. Thisoperation is not possible with VideoCDs
featuring PBC.
Problems during multi-channel processor connection
Symptom Cause Action (See)
No sounds are heard.
The volume level willnot rise.
Optical cables are notconnected
correctly.
Connect the cables correctly.
Multi-channel processor is not com-
patible with a 96kHz signal.
Switch the output setting to48 kHz. (Page 56)
Error messages
When problems occur with disc playback, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest PIONEER Service Center.
Message Cause Action (See)
ERROR-02 Dirtydisc Clean disc.
Scratched disc Replace disc.
The disc is loadedupside down Check that the discis loaded correctly.
ERROR-05 Electricalor mechanical PressRESET.
DIFFERENT REGION DISC (RE-
GION ERR)
The disc does nothave the same re-
gion number as this unit
Replace the DVDvideo with one bearing the
correct region number.
NON PLAYABLE DISC (NON-
PLAY)
This type of disccannot be played
by this unit
Replace the disc with one this unit can play.
THERMAL PROTECTION IN
MOTION (TEMP)
The temperature of this unit is out-
side the normal operating range
Wait until the units temperature returns to
within normal operating limits.
PROTECT All the files on the inserted discare
secured by digital rights manage-
ment (DRM)
Replace disc.
TRK SKIPPED The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Replace disc.
Additional Information
En
67
Appendix
Additional Information