Filter
Top Products
3 Move the joystick up to turn random
play on.
Tracks will play in a random order within the
previously selected M-CD or DISC ranges.
# To turn random play off, move the joystick
down.
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using M-CD, the
beginning of the first track of each disc is
played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Use the joystick to select SCAN.
3 Move the joystick up to turn scan play
on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4 When you find the desired track (or
disc) move the joystick down to turn scan
play off.
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1 Use the joystick to select PAUSE.
2 Move the joystick up to turn pause on.
Play of the current track pauses.
# To turn pause off, move the joystick down.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to program.
Move the joystick up or down to select the CD.
2 Use the joystick to select ITS MEMORY.
3 Move the joystick left or right to select
the desired track.
4 Move the joystick up to store the cur-
rently playing track in the playlist.
MEMORY is displayed briefly and the cur-
rently playing selection is added to your play-
list. The display then shows track number
again.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Multi-CD Player
En
45
Section
09
Multi-CD Player