Filter
Top Products
Introduction of advanced
multi-CD player operation
1
1 Function display
Shows the function names.
1 Click the joystick to display MENU.
FUNCTION and SETUP appear on the display.
2 Use the joystick to select FUNCTION.
Move to change the menu option; click to se-
lect.
The menu option selected with the joystick is
displayed with a frame.
The function names are displayed and oper-
able ones are highlighted.
3 Use the joystick to select the desired
function.
Move to change the function; click to select.
The function selected with the joystick is dis-
played with a frame.
# To go to the next group of function names,
move the joystick to NEXT and click it.
# To return to the previous group of function
names, move the joystick to PREV and click it.
# To return to the previous display, press BACK.
# To return to the playback display, press
BAND/ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: M-CD (multi-CD player re-
peat), TRACK (one-track repeat) and DISC
(disc repeat).
1 Use the joystick to select REPEAT.
2 Move the joystick left or right to select
the repeat range.
! M-CD Repeat all discs in the multi-CD
player
! TRACK Repeat just the current track
! DISC Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to M-CD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, M-CD
and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use the joystick to select RANDOM.
Multi-CD Player
En
44
Section
09