Filter
Top Products
Notes
! Linear PCM output of DTS audio is not possi-
ble. If you select LPCM, DTS audio is not out-
put.
! When using an amplifier and decoder that are
not Dolby Digital compatible, select LPCM.
Setting digital and analog
audio output
You can set linear PCM audio output for both
digital and analog output. Set audio output
correctly to match the components you are
using with this unit.
! When using digital connections, select
48kHz.
! When using analog connections, select
96kHz.
Important
If the setting is incorrect there will be no sound
so be sure to read the manuals of the connected
components.
1 Use the joystick to select AUDIO OUT in
AUDIO.
2 Move the joystick up or down to select
the audio output setting.
! 48kHz A 48 kHz signal is output regard-
less of the audio sampling frequency. A 96
kHz signal is converted to a 48 kHz signal.
(initial setting)
! 96kHz The signal is output with the same
frequency as the audio sampling frequency.
With a 96kHz signal, you can enjoy excep-
tionally high sound quality.
Notes
! With discs featuring 96 kHz recording, if you
select 96kHz, audio is not output from digital
output.
! With discs that do not feature a CSS (Content
Scrambling System) copy guardsignal, a 96
kHz digital signal is output.
! When using this unit with a Pioneer multi-
channel processor (DEQ-P7050), select
48kHz. If you select 96kHz, no sound will be
output when playing discs featuring 96 kHz re-
cordings.
Automatic playback of DVDs
When a DVDs disc with DVD menu is inserted,
this unit will cancel the DVD menu automati-
cally and start playback from the first chapter
of the first title.
! Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
1 Use the joystick to select DVD A. PLAY
in OTHERS.
2 Move the joystick up to turn automatic
playback on.
# To turn automatic playback off, move the joy-
stick down.
# When the automatic playback is on, you can-
not operate repeating play of DVD disc (refer to
Repeating play on page 25).
Setting up the DVD player
En
56
Section
11