Filter
Top Products
Switching the auxiliary 1 setting
1 Use MULTI-CONTROL to select AUX1 in
the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! AUDIO – auxiliary deviceconnected with
stereo mini plug cable
! VIDEO – auxiliary video device connected
with a 4-pole mini plug cable (e.g., CD-
V150M)
! OFF – No auxiliary deviceis connected
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Switching the auxiliary 2 setting
1 Use MULTI-CONTROL to select AUX2 in
the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to turn AUX2
on.
# To turn AUX2 off, press MULTI-CONTROL
again.
Switching the sound muting/
attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
or ATT ON are displayed and no audio ad-
justment is possible.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Use MULTI-CONTROL to select
MUTE/ATT in the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! MUTE – Muting
! ATT-10DB – Attenuation
! ATT-20DB – Attenuation (ATT-20DBhas a
stronger effect than ATT-10DB)
! OFF – Muting/attenuation is turned off
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Setting the AV input
You can connect AV components to the AV
input with an RCA cable.
Switch the AV input setting according to the
connected AV component.
For more details, refer to the installation man-
ual.
! Select EXT-VIDEO to watch video of a con-
nected video unit as EXTERNAL source.
! Select AUX to watch video of an auxiliary
device as AUX2 source.
1 Use MULTI-CONTROL to select VIDEO IN
in the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
Operating this unit
En
46
Section
02