Filter
Top Products
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! OFF – No video component connected
! EXT-VIDEO – External video unit (such as
Pioneer products available in the future)
! AUX – Auxiliary device
# To watch video of AUX source, set auxiliary 2
setting on. For details, refer to Switching the aux-
iliary setting on page 45.
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Selecting the illumination color
This unit is equipped with two illumination col-
ors, blue and red. You can select the desired il-
lumination color.
1 Use MULTI-CONTROL to select ILLUMI in
the initial setting menu.
Refer to Adjusting initial settings on page 45.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
BLUE (blue)—RED (red)
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1 Use MULTI-CONTROL to select SCROLL
in the initial setting menu.
Refer to Adjusting initial settings on page 45.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
EVER (ever)—OFF (off)
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Multi language display setting
Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in a European language or Russian.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
1 Use MULTI-CONTROL to select TITLE in
the initial setting menu.
Refer to Adjusting initial settings on page 45.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
Operating this unit
En
47
Section
02
Operating this unit