Filter
Top Products
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in CUSTOM.
1 Use MULTI-CONTROL to select FL (time
alignment adjustment) in the audio func-
tion menu.
Refer to Introduction of DSP adjustments on
page 52.
# When you select TA:OFFin INITIAL, you can-
not select FL.
# If a position other than F/L or F/R is selected,
CHECK POSI is displayed. To set the position,
refer to Using the position selector on page 53.
2 Press c or d to select the speaker to be
adjusted.
FL (front speaker left)—C (center speaker)—FR
(front speaker right)—RR (rear speaker right)
— RL (rear speaker left)— SW (subwoofer)
# You cannot select speakers whose size is set
to OFF. (Refer to Setting the speaker setting on
page 58.)
3 Press a or b to adjust the distance be-
tween the selected speaker and the listen-
ing position.
0.0 (cm) to 500.0 (cm) is displayed as the dis-
tance is increased or decreased.
4 Press BAND/ESC to return to the ordin-
ary display.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizercurve
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
EQ FLAT Flat
CUSTOM1 Custom 1
CUSTOM2 Custom 2
SUPER-BASS Superbass
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves.
! When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Use MULTI-CONTROL to select
POWERFUL (equalizer recall) in the audio
function menu.
Refer to Introduction of DSP adjustments on
page 52.
2 Press c or d to select the equalizer.
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—SUPER-BASS
Adjusting 3-band parametric
equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
! A separate CUSTOM1 curve can be cre-
ated for each source.
! A CUSTOM2 curve can be created com-
mon to all sources.
Available accessories
En
61
Section
03
Available accessories