Filter
Top Products
! To specify the playback sequence, the fol-
lowing method is recommended.
1 Createthe filename including numbers
that specify the playback sequence (e.g.,
001xxx.mp3 and 099yyy.mp3).
2 Put those files into a folder.
3 Record the folder containing files into the
USB device.
However, depending on the system environ-
ment, you cannot specify the file playback
sequence.
! Up to 65535 files on a USB portable audio
player/USB memory can be played back.
! Up to 6000 folders on a USB portable
audio player/USB memory can be played
back.
iPod compatibility
! This unit supports only the following iPods.
Supported iPod software versions are
shown below. Older versions of iPod soft-
ware may not be supported.
— iPod nano first generation (software ver-
sion 1.3.1)
— iPod nano second generation (software
version 1.1.3)
— iPod nano third generation (software
version 1.1.2)
— iPod fifth generation (software version
1.3.0)
— iPod classic (software version 1.1.2)
— iPod touch (software version 2.0)
— iPhone (software version 2.0)
— iPhone 3G (software version 2.0)
! Depending on the generation or version of
the iPod, some functions can not be oper-
ated.
! Operations may vary depending on the soft-
ware version of iPod.
! When using an iPod, iPod Dock Connector
to USB Cable is required.
! Pioneer CD-IU50 interface cable is also
available. For details, consult your dealer.
! When using an iPod with video capabilities,
the interface cable (e.g., CD-IU50V) is re-
quired.
About handling the iPod
CAUTION
! Pioneer accepts no responsibility for data lost
on the iPod even if thatdata is lost while
using this unit.
! Do not leave the iPod in direct sunlight for ex-
tended amounts of time. Extended exposure
to direct sunlight can result in iPod malfunc-
tion due to the resulting high temperature.
! Do not leave the iPod in a high temperature.
! Firmly secure the iPod when driving. Do not
let the iPod fall onto the floor, where it may be-
come jammed under the brake or accelerator
pedal.
For details, refer to the iPod’s manuals.
About iPod settings
! When an iPod is connected, this unit
changes the EQ (equalizer) setting of the
iPod to Flat in order to optimize the acous-
tics. When you disconnect the iPod, the EQ
returns to the original setting.
! You cannot set Repeat to off on the iPod
when using this unit. Even if you set Repeat
to off on the iPod, Repeat is automatically
changed to All when connecting the iPod
to this unit.
JPEG picture files
! JPEG is short for Joint Photographic Ex-
perts Group and refers to a still image com-
pression technology standard.
! Files are compatible with Baseline JPEG
and EXIF 2.1 still image up to resolution of
8 192 × 7 680. (EXIF format is used most
commonly with digital still cameras.)
Additional Information
En
72
Appendix